GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 L300/LW300 🢒 Suspension 🢒 Rear Suspension 🢒 Rear Axle Upper Control Arm Replacement

Removal Procedure
  1. Remove the rear support assembly. Refer to Support Replacement .

    2. Object Number: 891523 Size: SH
  2. Remove the rear suspension upper control arm to support assembly bolt and nut. Discard the nut and bolt.
  3. Remove the rear suspension upper control arm from the support assembly.

Installation Procedure

    Object Number: 891523 Size: SH
  1. Install the rear suspension upper control arm to the support assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install a new nut and bolt to the rear suspension upper control arm to support assembly.

    3. Tighten
    Tighten the nut and bolt to 90 N·m (66 lb ft) plus and additional 60 to 75 degrees.

  3. Install the rear support assembly. Refer to Support Replacement .