• | Remove the retaining clamp (1). |
• | Disconnect the selector lever cable from the bracket. |
• | Disconnect the wiring harness plug (1). |
• | Remove the 4 bolts (2). |
• | Remove the selector lever assembly. |
Notice: Refer to Fastener Notice in the Preface section.
• | Insert the range selector lever assembly. |
Tighten
Tighten the 4 bolts to 5 N·m (44 lb in).
• | Connect the wiring harness plug (1). |
• | Install the selector lever cable to the bracket. |
• | Install the retaining clamp. |