Important: The following steps must be completed before
using the symptom tables:
- On vehicles equipped with content theft deterrent (UA6), perform
Diagnostic System Check - Vehicle
in Vehicle DTC Information, before using the symptom
tables in order to verify that there are no DTCs set.
- Review the system operation in order to familiarize yourself with the
system functions. Refer to
Horns System Description and Operation
.
Visual/Physical Inspection
| • | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. |
| • | Perform the following if a horn buzzes or has a harsh tone: |
| - | Inspect for debris in the joint where the horn fastens to the vehicle. |
| - | Test the torque of the horn mounting hardware. The horn mounting hardware
should be tightened to a torque of 10 N·m (7 lb ft). |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom:
