GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Door Window Channel Replacement

Removal Procedure
  1. Remove the inside door handle assembly, if required. Refer to Door Inside Handle Replacement .
  2. Remove the door trim panel. Refer to Door Trim Panel Replacement .

    3. Object Number: 1339352 Size: SH
  3. Remove the 3 door brackets (1) from the door inner panel (3) by levering out the center pin of the bracket.
  4. Carefully, peel off the door water shield (2) upwards to gain access to the window guide.
  5. Remove the outside rear view mirror. Refer to Outside Rearview Mirror Replacement .
  6. Remove the door speaker. Refer to Radio Front Side Door Speaker Replacement in Entertainment.

    7. Object Number: 1345125 Size: SH
  7. Remove the 2 door inner panel belt seals (1).

    8. Object Number: 1345128 Size: SH
  8. Remove the window weather-strip (1) from the window channel (2).

    9. Object Number: 1345136 Size: SH
  9. Partially remove the door upper weather-strip (1) from the lip on the door upper frame, to allow access to the front window channel cap (2).

    10. Object Number: 1345141 Size: SH
  10. Remove the window channel cap (1) away from the window channel (2).

    11. Object Number: 1345146 Size: SH
  11. Remove the 3 bolts (1) securing the window channel (2) to the door panel (3).

    12. Object Number: 1345153 Size: SH
  12. Remove the window channel (1) from the door  (3) in an upward direction, disengaging the window slides (2) from the window channel (1).

Installation Procedure

    Object Number: 1345153 Size: SH
  1. Position the window channel (1) to the door (3) and engage the window slides (2) to the window channel (1).

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1345146 Size: SH
  2. Install the 3 bolts (1) to the window channel (2).

    3. Tighten
    Tighten the 3 bolts to 7 N·m (62 lb in).


    Object Number: 1345141 Size: SH
  3. Install the window channel cap (1) to the window channel (2).

    4. Object Number: 1345136 Size: SH
  4. Reposition and install the door upper weather-strip (1) to the lip on the door upper frame.

    5. Object Number: 1345128 Size: SH
  5. Install the window weather-strip (1) to the window channel (2).

    6. Object Number: 1345125 Size: SH
  6. Install the 2 inner door panel belt seals (1).
  7. Install the door speaker. Refer to Radio Front Side Door Speaker Replacement in Entertainment.
  8. Install the outside rearview mirror. Refer to Outside Rearview Mirror Replacement .
  9. Adjust the door window, if necessary. Refer to Front Side Door Window Adjustment .

    10. Object Number: 1339352 Size: SH
  10. Reposition and install the door water shield (2).
  11. Install the 3 door brackets (1) to the inner door panel (3).
  12. Install the door trim panel. Refer to Door Trim Panel Replacement .
  13. Install the inside door handle assembly, if removed. Refer to Door Inside Handle Replacement .