For 1990-2009 cars only
Removal Procedure
- Remove the drivers door outside handle bracket. Refer to Door Outside Handle Bracket Replacement .
- Remove the clip (1) and slide the cam (7), spring (6), lever (5), spring (2) and rollers (4) away from the lock assembly.
- Remove the spring (3) from the lock assembly.
- Using a suitable pair of pliers, pull the door lock barrel housing pin (1) out of the drivers door outside handle bracket (2).
- Rotate the cover (1), housing (2), O-ring (8), cylinder assembly (7), sleeve (6), and coupling (5) in a counter-clockwise direction, being careful not lose the two balls (3) while removing from the door outside handle bracket (4).
Installation Procedure
- Install the coupling (5), sleeve (6) with the two balls (3), cylinder assembly (7) O-ring (8), housing (2) and cover (1) to the door outside handle bracket (4) while rotating in a clock-wise direction.
- Install the door lock barrel housing pin (1) to the drivers door outside handle bracket (2).
- Install the spring (3) to the lock assembly.
- Install the rollers (4), spring (2), lever (5), cam (7) and clip (1) to the lock assembly.
- Install the driver's door outside handle bracket. Refer to Door Outside Handle Bracket Replacement .
