Folding Top Stowage Compartment Front Outer Closeout Panel Replacement. Pontiac G6 2006

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2006 🢒 G6 🢒 Body 🢒 Roof 🢒 Folding Top Stowage Compartment Front Outer Closeout Panel Replacement

Callout	Component Name
Preliminary Procedure Place the folding top into service position. Refer to Folding Top Retainer Strap Installation Position .
1	Rear Folding Top Stowage Compartment Panel Trim Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 9 N·m (80 lb in)
2	Rear Folding Top Stowage Compartment Panel Trim Assembly Tip If replacing panels, transfer all necessary components as needed. Cycle the folding top a few seconds at a time to ensure that the tonneau is moving properly and not hanging up or interfering with the top. After the installing the outer panel, adjust as needed. Refer to Folding Top Stowage Compartment Front Outer Closeout Panel Replacement .

Callout

Component Name

Place the folding top into service position. Refer to Folding Top Retainer Strap Installation Position .

Rear Folding Top Stowage Compartment Panel Trim Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

Rear Folding Top Stowage Compartment Panel Trim Assembly

Tip

If replacing panels, transfer all necessary components as needed.
Cycle the folding top a few seconds at a time to ensure that the tonneau is moving properly and not hanging up or interfering with the top.
After the installing the outer panel, adjust as needed. Refer to Folding Top Stowage Compartment Front Outer Closeout Panel Replacement .