For 1990-2009 cars only
Removal Procedure
- Remove the right (rear) camshafts. Refer to Camshaft Replacement - Right Side .
- Remove the camshaft followers from the cylinder head. Keep the followers in the order they were removed.
- Clean and inspect the components. Refer to Camshaft Cleaning and Inspection and Valve Lifters Cleaning and Inspection .
- Store the camshaft and followers in a clean, secure location.
Installation Procedure
- Apply a liberal amount of clean engine oil to the roller (2), lash adjuster and valve tip areas (1) of the camshaft followers.
- Place the camshaft followers in position on the valve tip and lifter. The rounded head end of the follower goes on the lash adjuster while the flat end goes on the valve tip.
- Clean the camshaft journals and carriers with a clean, lint-free cloth.
- Install the right (rear) camshafts. Refer to Camshaft Replacement - Right Side .
Important: The follower must be positioned squarely on the valve tip so that the full width of the roller will completely contact the camshaft lobe. If the followers are being reused you must put them back in their original location.
