GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Engine 🢒 Engine Cooling 🢒 Engine Coolant Fan Shroud Replacement

Removal Procedure
  1. Remove the cooling fans. Refer to Engine Cooling Fan Replacement .

    2. Object Number: 381381 Size: SH
  2. Remove the cooling fan motors bolts.
  3. Remove the cooling fan motors from the fan shroud.

Installation Procedure

    Object Number: 381381 Size: SH
  1. Install the cooling fan motors onto the fan shroud.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the cooling fan motors bolts.

    3. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  3. Install the cooling fans. Refer to Engine Cooling Fan Replacement .