Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Is the POWER SEATS circuit breaker open? | -- | Go to Step 2 | Go to Step 30 |
2 | Using a test light, frontprobe between the fuse block terminal N2 circuit 340 and B+. Is the test light on? | -- | Go to Step 3 | Go to Step 4 |
3 | Repair the short to ground in circuit 340. Is the repair complete? | -- | Go to Step 29 | -- |
4 |
Is the test light on when pressing the switch? | -- | Go to Step 26 | Go to Step 27 |
5 |
Is the test light on? | -- | Go to Step 6 | Go to Step 7 |
6 | Inspect the fuel tank door lock assembly for mechanical interference. Is there mechanical interference? | -- | Go to Step 8 | Go to Step 9 |
7 | Using a test light, backprobe between the fuel tank filler door lock actuator connector terminal B and B+. Is the test light on? | -- | Go to Step 10 | Go to Step 11 |
8 | Repair the mechanical interference. Is the repair complete? | -- | Go to Step 29 | -- |
9 | Replace the fuel tank filler door lock actuator. Refer to Fuel Tank Filler Door Lock Actuator Replacement . Is the repair complete? | -- | Go to Step 29 | -- |
10 |
Is the test light on? | -- | Go to Step 12 | Go to Step 13 |
11 | Repair the poor connection or open in circuit 350. Is the repair complete? | -- | Go to Step 29 | -- |
12 | Repair the poor connection or open in circuit 79. Is the repair complete? | -- | Go to Step 29 | -- |
13 | Using a test light, backprobe between the fuel tank filler door lock relay connector terminal A1 and ground. Is the test light on? | -- | Go to Step 14 | Go to Step 21 |
14 | Using a test light, backprobe between the fuel tank filler door lock relay connector terminal C1 and ground. Is the test light on? | -- | Go to Step 15 | Go to Step 16 |
15 |
Is the test light on? | -- | Go to Step 17 | Go to Step 18 |
16 |
Is the test light on? | -- | Go to Step 22 | Go to Step 23 |
17 | Replace the fuel tank filler door lock relay. Is the repair complete? | -- | Go to Step 29 | -- |
18 |
Is the test light on? | -- | Go to Step 19 | Go to Step 20 |
19 | Repair the poor connection or open in circuit 186. Is the repair complete? | -- | Go to Step 29 | -- |
20 | Replace the rear compartment lid and fuel tank filler door release switch. Refer to Instrument Panel Multifunction Switch Assembly Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | Go to Step 29 | -- |
21 | Using a test light, backprobe between the underhood accessory wiring junction block harness connector C2 terminal A9 and ground. Is the test light on? | -- | Go to Step 24 | Go to Step 25 |
22 | Repair the poor connection or open in circuit 340. Is the repair complete? | -- | Go to Step 29 | -- |
23 | Repair the battery feed to the fuse block. Is the repair complete? | -- | Go to Step 29 | -- |
24 | Repair the poor connection or open in circuit 275. Is the repair complete? | -- | Go to Step 29 | -- |
25 | Replace the underhood accessory wiring junction block. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems. Is the repair complete? | -- | Go to Step 29 | -- |
26 |
Does the light illuminate when the switch is present? | -- | Go to Step 28 | Go to Step 9 |
27 | Replace the POWER SEATS circuits breaker. Is the repair complete? | -- | Go to Step 29 | -- |
28 | Repair the short to ground in circuit 79. Is the repair complete? | -- | Go to Step 29 | -- |
29 |
Is the action complete? | -- | -- | |
30 | Inspect the R/CMPT REL fuse in the underhood accessory wiring junction block. Is the R/CMPT REL fuse open? | -- | Go to Step 31 | Go to Step 5 |
31 | Repair the short to ground in circuit 840. Is the repair complete? | -- | Go to Step 29 | -- |
