Removal Procedure
- Open the rear compartment lid.
- Pull back the left rear compartment trim panel.
- Open fuel filler door.
- Remove the fuel filler
door actuator cable to fuel filler pocket nut.
- Remove the fuel filler door actuator cable from the fuel filler
pocket.
- Remove the fuel filler
door actuator cable from the wheelhouse access hole.
- Remove the fuel filler door actuator bracket to wheelhouse bolt.
- Disconnect the electrical connector from the fuel filler door
actuator.
- Remove the fuel filler door actuator cable from the fuel filler
door actuator.
- Remove the fuel filler door actuator from the fuel filler door
actuator bracket.
Installation Procedure
- Install the fuel filler
door actuator cable to the fuel filler door actuator.
- Connect the electrical connector to the fuel filler door actuator.
- Position the fuel filler door actuator tabs through the holes
in the fuel filler door actuator bracket located on wheelhouse.
- Install the fuel filler door actuator to fuel filler door actuator
bracket bolt.
Tighten
Tighten the fuel filler door actuator to fuel filler door actuator
bracket bolt to 6 N·m (53 lb in).
- Insert the fuel filler door actuator cable through wheelhouse
access hole and fuel filler pocket.
Apply pressure until the grommet is fully seated.
- Install the fuel filler
door actuator cable to fuel filler pocket nut.
Tighten
Tighten the fuel filler door actuator to fuel filler pocket nut to 2 N·m (18 lb in).
- Close the fuel filler door.
- Reposition the left rear compartment trim panel.
- Close the rear compartment lid.