GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Inner Panel Trim Replacement

Removal Procedure
  1. Remove the license lamps. Refer to Rear License Lamp Replacement in Lighting Systems.

    2. Object Number: 182206 Size: SH
  2. Remove the rear compartment lid trim to rear compartment lid screws.

    3. Object Number: 182212 Size: SH
  3. Remove the rear compartment lid trim from the rear compartment lid.

Installation Procedure

    Object Number: 182206 Size: SH
  1. Align the rear compartment lid trim to the rear compartment lid.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 182212 Size: SH
  2. Install the rear compartment lid trim to rear compartment lid screws.

    3. Tighten
    Tighten the rear compartment lid trim screws to 2 N·m (18 lb in).

  3. Install the license lamps. Refer to Rear License Lamp Replacement in Lighting Systems.