GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear License Plate Lamp Replacement

Removal Procedure

    Object Number: 182212 Size: SH
  1. Open the rear compartment.
  2. Remove the rear compartment lid trim screws from the rear compartment lid.
  3. Remove the rear compartment lid trim from the rear compartment lid..

    4. Object Number: 182458 Size: SH
  4. Reach through the access opening on the underside of the rear compartment lid and depress the license lamp retainers to release.
  5. Push the license lamp out from the rear compartment lid.
  6. Disconnect the electrical connector from the license lamp.
  7. Release the license lamp lens retaining tabs, then remove the lens from the license lamp base, if replacing the bulb.
  8. Remove the license lamp bulb from the socket, if replacing the bulb.

Installation Procedure

    Object Number: 182458 Size: SH
  1. Install the license lamp bulb to the lamp socket, if removed.
  2. Align the license lamp lens to the license lamp base, then press to secure the retaining tabs, if removed.
  3. Connect the electrical connector to the license lamp.
  4. Align the license lamp assembly to the opening in the rear compartment lid, then press to secure the retaining tabs.

    5. Object Number: 182212 Size: SH
  5. Install the rear compartment lid trim to the rear compartment lid.

    6. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the rear compartment lid trim screws.

    7. Tighten
    Tighten the rear compartment lid trimscrews to 2 N·m (18 lb in).

  7. Close the rear compartment.