GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Window Belt Inner Sealing Strip Replacement

Removal Procedure
  1. Lower the front door window to the full open position.
  2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .

    3. Object Number: 164365 Size: SH
  3. Lift up on the front door window inner belt sealing strip to remove from the front door pinch-weld flange.

Installation Procedure

    Important: 

       • Ensure the front end of the inner belt sealing strip is inserted into the gap formed by the window weatherstrip and the door inner panel.
       • Ensure the rear end of the inner belt sealing strip is flush to the rear leg of the window weatherstrip but not interfering with the path of the window.


    Object Number: 164365 Size: SH
  1. Align the front door window inner belt sealing strip to the pinch-weld flange.
  2. Apply pressure to the front door window inner belt sealing strip until fully seated.
  3. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  4. Raise the front door window to the full closed position.