GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 164500  Size: SH
  1. Remove the front door inner trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.
  2. Remove the front door speaker screws.
  3. Disconnect the electrical/audio connectors from the front door speaker.
  4. Remove the front door speaker.

Installation Procedure


    Object Number: 164500  Size: SH
  1. Connect the electrical/audio connector to the front door speaker.
  2. Position the front door speaker to the front door.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the front door speaker screws.
  5. Tighten
    Tighten the front door speaker screws to 2 N·m (18 lb in).

  6. Install the front door inner trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.