Preliminary Procedures

1. Remove the front headlamp assemblies. Refer to Headlamp Assembly, Headlamp Capsule and Park and Turn Signal Lamp Replacement .
2. Remove the front wheelhouse panels. Refer to Wheelhouse Panel Replacement .

1

Front Fascia Plastic Retainers (Qty: 2)

2

Front Fascia Plastic Retainers (Qty: 2)

3

Front Fascia Plastic Retainers (Qty: 2)

Tip
Use a small flat bladed screwdriver to remove the six metal retaining clips on the top of the fascia to disengage it from the intermediate filler.

4

Front Fascia

Tip
The lower portion of the fascia is held in place by several plastic tabs that engage in slots in the bumper intermediate filler. Use firm pressure to disengage but be careful not to damage the front fascia while removing it.