These messages will appear if there is a problem detected in one of your vehicle's systems.
Any message will clear when the vehicle's condition is no longer present. To acknowledge a message and clear it from the display, press any of the three DIC buttons. The warning message will come back on the next time the vehicle is turned off and back on if the condition is still present. With most messages, a warning chime will sound when the message is displayed. Your vehicle may have other warning messages.
AUTO LIGHTS OFF: This message will display if the automatic headlamp system is disabled with the headlamp switch.Messages are displayed on the uplevel DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another.
Some messages may not require immediate action, but you can press any of the DIC buttons on the uplevel vehicle to acknowledge that you received the message and clear it from the DIC display.
Some messages cannot be cleared from the DIC display because they are more urgent. These messages require action before they can be cleared.
If there are any active warning messages when the vehicle is turned off, two chimes will sound and the DIC will go into a reminder mode. The reminder mode displays any active message. If there are multiple messages, the DIC will display each message for five seconds. After each active message is displayed once, the reminder mode will turn off.
You should take any messages that appear on the display seriously and remember that clearing the messages will only make the messages disappear, not correct the problem.
The following are the possible messages that can be displayed and some information about them.
This message will display when the engine coolant becomes hotter than the normal operating temperature. See Engine Coolant Temperature Gage . To avoid added strain on a hot engine, the air conditioning compressor is automatically turned off. When the coolant temperature returns to normal, the air conditioning compressor will turn back on. You can continue to drive your vehicle.
This message will come on while the ignition is in RUN. Press any of the DIC buttons to acknowledge this warning message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on. If this message continues to appear, have the system repaired by your GM dealer as soon as possible to avoid damage to your engine.
This message will display when the system detects that the battery voltage is dropping beyond a reasonable level. The battery saver system will start reducing certain features of the vehicle that you may be able to notice. At the point that the features are disabled, this message is displayed. It means that the vehicle is trying to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery to recharge.
The normal battery voltage range is 11.5 to 15.5 volts. If you have an uplevel DIC, you can monitor the battery voltage by pressing the gages button until BATTERY displays.
This message will display when service is required for the vehicle. See your GM dealer. See Engine Oil and Scheduled Maintenance for more information.
The CHANGE OIL SOON message is reset by acknowledging the message. The OIL LIFE screen under the gages menu on the DIC must also be reset. See "Oil Life" under DIC Operation and Displays and Engine Oil Life System .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when there is a problem with the generator and battery charging systems. Driving with this problem could drain your battery. Turn off all unnecessary accessories. Stop and turn off the vehicle as soon as it is safe to do so. Have the electrical system checked by your GM dealer immediately.
This message will display and a chime will sound while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message may be displayed if the gas cap is not on, or is not fully tightened. Check the gas cap to ensure that it is on properly. The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap will allow fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn this message off. See Filling the Tank for more information.
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display to inform the driver that even though a door lock switch or the lock button on the remote keyless entry transmitter has been pressed, that actual locking of the doors is being delayed because the delayed locking feature has been activated in the DIC. See "DELAYED LOCKING" under DIC Vehicle Personalization for more information.
This message will appear and a chime will sound when the ignition is off.
This message cannot be acknowledged.
This message will display when the driver's door is not closed properly. When this message appears, you should make sure that the driver's door is closed completely.
This message will display while the ignition is in RUN. A chime will sound when the ignition is shifted out of PARK (P). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the driver's side rear door is not closed properly. When this message appears, you should make sure that the driver's side rear door is closed completely.
This message will display while the ignition is in RUN. A chime will sound when the ignition is shifted out of PARK (P). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
Notice: If you drive your vehicle while the engine is overheating, severe engine damage may occur. If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible. Do not increase the engine speed above normal idling speed. See Engine Overheating for more information.
This message will display when the engine coolant temperature is too hot. The engine coolant temperature warning light will also appear on the instrument panel cluster. See Engine Coolant Temperature Warning Light and Engine Coolant Temperature Gage for more information.
To avoid added strain on the engine, turn off the air conditioner if it is on. When the coolant temperature returns to normal, the air conditioner can be turned back on.
This message will display only when the ignition is in RUN. A chime will sound continuously when this message is displayed. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the amount of available light outside of the vehicle is low, or the windshield wipers have been on for approximately 30 seconds, and the exterior lamps control is off or in the park lamps position. This message informs the driver that turning on the exterior lamps is recommended. See Exterior Lamps for more information.
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the hood is not closed properly. When this message appears, you should make sure that the hood is closed completely. See Hood Release .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the transaxle fluid in your vehicle is too hot. Stop the vehicle and allow it to idle until it cools down. If the warning message continues to display, have the vehicle serviced by your GM dealer as soon as possible.
This message will display and a chime will sound only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the battery in the remote keyless entry transmitter needs to be replaced. To replace the battery, see "Battery Replacement" under Remote Keyless Entry (RKE) System Operation .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display and a chime will sound continuously when the driver's door is open and the key is in the ignition and in the accessory or off position.
This message cannot be acknowledged.
This message will disappear and the chiming will stop when the key is removed from the ignition.
This message will display when the left front turn signal bulb needs to be replaced. See Front Turn Signal and Parking Lamps .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the left rear turn signal bulb needs to be replaced. See Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the brake fluid level is low. Fill the brake master cylinder to the proper level. See Engine Compartment Overview for the location of the brake master cylinder reservoir. Also, see Brakes for proper fluid level.
The brake system warning light will also appear on the instrument panel cluster when this message appears on the DIC. See Brake System Warning Light .
This message will display and a chime will sound only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when your vehicle is low on fuel. You should refill the tank as soon as possible. See Fuel Gage and Filling the Tank for more information.
The message will display and a chime will sound while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the vehicle's engine oil is low. Fill the oil to the proper level as soon as possible. See Engine Compartment Overview for the engine oil fill location. Also, see Engine Oil for information on the kind of oil to use and the proper oil level.
The message will display and a chime will sound while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
Notice: If the LOW OIL PRESSURE warning message appears on the DIC display, stop the vehicle immediately. Do not drive the vehicle until the cause of the low oil pressure is corrected. Severe engine damage can result from driving a vehicle with low oil pressure. See Engine Oil for more information.
This message will display when the vehicle's engine oil pressure is low. The oil pressure light will also appear on the instrument panel cluster. See Oil Pressure Light .
Stop the vehicle immediately, as engine damage can result from driving a vehicle with low oil pressure. Have the vehicle serviced by your GM dealer as soon as possible when this message is displayed.
This message will display only when the ignition is in RUN. A chime will sound continuously when this message is displayed.
This message cannot be acknowledged and cleared from the screen. This message will re-display for a few seconds if the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the windshield washer fluid is low. Fill the windshield washer reservoir as soon as possible. See Engine Compartment Overview for the location of the windshield washer reservoir. Also, see Windshield Washer Fluid for more information.
This message will display and a chime will sound only when the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display to alert the driver when the vehicle's parking brake is on, the ignition is in RUN, and the vehicle speed is greater than 5 mph (8 km/h). Release the parking brake before driving. See Parking Brake for more information.
The brake light will also appear on the instrument panel cluster when this message appears on the DIC. See Brake System Warning Light .
A chime will sound continuously while this message is displayed if driving above 5 mph (8 km/h). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display to alert the driver when the headlamps or parking lamps are on while the ignition is off and the driver's door is opened. See Exterior Lamps for more information.
A chime will sound continuously while this message is displayed. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will display when the front passenger's door is not closed properly. When this message appears, you should make sure that the front passenger's door is closed completely.
This message will display while the ignition is in RUN. A chime will sound when the ignition is shifted out of PARK (P). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the passenger's side rear door is not closed properly. When this message appears, you should make sure that the passenger's side rear door is closed completely.
This message will display while the ignition is in RUN. A chime will sound when the ignition is shifted out of PARK (P). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your GM dealer for service as soon as possible.
This message will display and a chime will sound only when the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when your vehicle is in an overheated engine operating mode. This operating mode allows your vehicle to be driven to a safe place in an emergency. In this mode, you will notice a significant loss in power and engine performance. See Overheated Engine Protection Operating Mode for more information. Anytime this message is on, the vehicle should be taken to your GM dealer for service as soon as possible.
This message will display and a chime will sound only when the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This warning message will come on if a remote start attempt is unsuccessful. This may be caused if any of the following conditions are true when a remote start attempt is made:
• | The remote start system is disabled through the DIC. |
• | The key is in the ignition. |
• | The hood or the doors are not closed. |
• | There is an emission control system malfunction. |
• | The engine coolant temperature is too high. |
• | The oil pressure is low. |
• | The hazard warning flashers are turned on. |
• | The maximum number of remote starts or remote start attempts between ignition cycles has been reached. |
• | The content theft-deterrent alarm is on while attempting to remote start the vehicle. |
See "REMOTE START" under DIC Vehicle Personalization and "Remote Vehicle Start" under Remote Keyless Entry (RKE) System Operation for more information.
This message will display when the right front turn signal bulb needs to be replaced. See Front Turn Signal and Parking Lamps .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when the right rear turn signal bulb needs to be replaced. See Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps .
This message will display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
If the vehicle has the Anti-Lock Brake System (ABS), this message will display when the system is not functioning properly. Have the brake system serviced by your GM dealer as soon as possible.
The anti-lock brake system warning light will also appear on the instrument panel cluster when this message appears on the DIC. See Antilock Brake System (ABS) Warning Light .
This message will only display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when a problem with the brake system has been detected. Have your vehicle serviced by your GM dealer as soon as possible.
The brake system warning light will also appear on the instrument panel cluster when this message appears on the DIC. See Brake System Warning Light .
This message will only display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when there is a problem with the park lamps. Check to see if the park lamp fuse is blown and replace the fuse if necessary. See Fuses and Circuit Breakers and Instrument Panel Fuse Block for more information. If changing the fuse does not correct the problem, see your GM dealer.
This message will only display while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
If your vehicle has StabiliTrak®, this message will display if there has been a problem detected with StabiliTrak®. A warning light will also appear on the instrument panel cluster. See Traction Control System (TCS) Warning Light . See StabiliTrak® System for more information.
If this message turns on while you are driving, pull off the road as soon as possible and stop carefully. Try resetting the system by turning the ignition off and then back on. If this message still stays on or turns back on again while you are driving, your vehicle needs service. Have the StabiliTrak® System inspected by your GM dealer as soon as possible.
This message will display only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when there is a problem with the theft-deterrent system programmed in the key. A fault has been detected in the system which means that the system is disabled and it is not protecting the vehicle. The vehicle usually restarts; however, you may want to take the vehicle to your GM dealer before turning off the engine. See PASS-Key® III Electronic Immobilizer Operation for more information.
This message will display and a chime will sound only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
If your vehicle has the traction control system, this message will display when the system is not functioning properly. A warning light will also appear on the instrument panel cluster. See Traction Control System (TCS) Warning Light . See Traction Control System (TCS) for more information. Have the traction control system serviced by your GM dealer as soon as possible.
This message will display only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
If your vehicle has variable effort steering, this message will display when if this system is not functioning properly. See Steering for more information. Have your system serviced by your GM dealer as soon as possible.
This message will display only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display when a non-emissions related malfunction occurs. Have the vehicle serviced by your GM dealer as soon as possible.
This message will display only while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
If your vehicle has StabiliTrak®, this message will display when StabiliTrak® is actively assisting you with directional control of the vehicle. Slippery road conditions may exist when this message is displayed, so adjust your driving accordingly. See StabiliTrak® System .
This message will display only while the ignition is in RUN. This message stays on until road conditions change and StabiliTrak® is not active.
This message cannot be acknowledged and cleared from the screen.
If your vehicle has StabiliTrak®, this message will display any time the system turns off. When this message has been displayed, StabiliTrak® is no longer available to assist you with directional control of the vehicle. Adjust your driving accordingly. See StabiliTrak® System .
This message will display only while the ignition is in RUN.
Any of the following conditions may cause the StabiliTrak® system to turn off:
• | The battery is low. |
• | There is a StabiliTrak® system failure. See your GM dealer for service. |
This message will display if the starting of the engine is disabled due to the electronic throttle control system or vehicle theft-deterrent system. Have your vehicle serviced by your GM dealer immediately.
This message will only appear while the ignition is in RUN, and will not disappear until the problem is resolved.
This message cannot be acknowledged.
If your vehicle has the traction control system, this message will display when the system is on. Slippery road conditions may exist if this message is displayed, so adjust your driving accordingly. See Traction Control System (TCS) for more information.
This message only displays while the ignition is in RUN and will not disappear until driving conditions change and the traction control is no longer active.
This message cannot be acknowledged or cleared from the screen.
If your vehicle has the traction control system, this message will display when the traction control system turns off. See Traction Control System (TCS) for more information.
This message will only display while the ignition is in RUN and will disappear after two seconds.
Any of the following conditions may cause the traction control system to turn off:
• | The traction control system is turned off by pressing the traction control button located on the center of the instrument panel. See Traction Control System (TCS) . |
• | The battery is low. |
• | There is a traction control system failure. See your GM dealer for service. |
This message will display when the trunk is not closed completely. You should make sure that the trunk is closed completely. See Trunk .
This message will display while the ignition is in RUN. A chime will sound when the ignition is shifted out of PARK (P). Press any of the DIC buttons to acknowledge this message and to clear it from the screen.
This message will continue to display for two seconds if it has not been acknowledged when the engine is turned off. It will also re-display for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off.
If the condition still exists, the message will re-appear when the engine is turned on.
This message will display as a reminder to turn off the turn signal if you drive your vehicle for more than about 0.75 mile (1.2 km) with a turn signal on. See Turn Signal/Multifunction Lever .
This message displays and a chime sounds only when the ignition is in RUN. This message will clear from the screen if the turn signal is manually turned off, a turn is completed, or the message is acknowledged.