Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Outside Mirrors Circuit Description operation and perform the necessary inspections | Go to Step 2 | Go to Symptoms - Doors |
2 | Verify that the power mirrors are inoperative. Are both power mirrors inoperative? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 | Backprobe the power mirror switch with a test lamp from cavity 5 to ground with the ignition switch in the ON position. Does the test lamp light? | Go to Step 5 | Go to Step 4 |
4 | Repair the open in the WHT/BLK wire between the power mirror switch and the junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- |
5 | Backprobe the power mirror switch with a test lamp from cavity 7 to B+. Does the test lamp light? | Go to Step 7 | Go to Step 6 |
6 | Repair the open in the BLK wire between the power mirror switch and G200. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- |
7 |
Is continuity present? | Go to Step 9 | Go to Step 8 |
8 | Repair the open in the GRY wire between the power mirror switch and S243. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- |
9 | Replace the power mirror switch. Refer to Power Mirror Switch Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
