Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Has the Garage Door Opener System Check been performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 5 |
3 | Connect a J 35616-200 test lamp between connector C307 cavity B wire 150 (BLK) and B+. Does test lamp light? | -- | Go to Step 4 | Go to Step 6 |
4 | Replace the garage door opener. Refer to Garage Door Opener Module Replacement . Is the repair complete? | -- | -- | |
5 | Locate and repair open in CKT 40 (ORN) between garage door opener and the IP fuse block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Locate and repair open in CKT 150 (BLK) between the garage door opener and G400. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
