Removal Procedure
- Remove the driver or passenger front seat. Refer to Seat Replacement .
- Remove the head rest. Refer to Front Seat Head Restraint Replacement .
- Remove the knob on the release lever for the seat back lock on Coupe and Convertible models.
- Disengage the front seat back pad and cover closeout strip.
- Lift the front seat back pad and cover as necessary in order to access the front seat recliner bolts (1).
- Remove the front seat recliner bolts (1, 2).
- Remove the front seat recliner.
Installation Procedure
- Install the front seat recliner.
- Install the front seat recliner bolts (1).
- Install the front seat cushion bolts (2)
- Reposition the front seat back pad and cover assembly.
- Reconnect the front seat back pad and cover closeout strip.
- Install the knob on the release lever for the seat back lock.
- Install the headrest. Refer to Front Seat Head Restraint Replacement .
- Install the driver or passenger front seat. Refer to Seat Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the front seat recliner back bolts to 15 N·m (11 lb ft).
Tighten
Tighten the front seat cushion bolts to 24 N·m (18 lb ft).
