Removal Procedure
- Place the sunshade in the full forward position.
- Remove the headlining trim finish panel. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Disconnect the electrical connector from the following components:
| 3.1. | The sunroof control switch |
| 3.2. | The sunroof express module |
Important:
| • | Note the location of the wiring harness. |
| • | Note the location of the tie-straps that secure the harness to
the drive cables and to the sunroof module. |
- Remove the wiring harness from the sunroof.
Installation Procedure
- Install the wiring harness to the sunroof.
- Connect the electrical connector to the following components:
| 2.1. | The sunroof control switch |
| 2.2. | The sunroof express module |
| 2.3. | The sunroof actuator |
- Install the headlining trim finish panel. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Inspect the sunroof for proper operation.
