Pedestrian Impact Detection Sensor Replacement - Front Upper Beam. Cadillac CTS 2008

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 CTS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Pedestrian Impact Detection Sensor Replacement - Front Upper Beam

Callout	Component Name
Preliminary Procedures Disable the pedestrian impact detection system. Refer to Pedestrian Impact Detection System Disabling and Enabling. Remove the front fascia. Refer to Front Bumper Fascia Replacement. Remove the front fascia absorber. Refer to Front Bumper Fascia Energy Absorber Replacement.
1	Pedestrian Impact Detection Sensor Bolt (Qty: 5) Notice: Refer to Fastener Notice in the Preface section. Tighten 3 N·m (27 lb in)
2	Pedestrian Impact Detection Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

Disable the pedestrian impact detection system. Refer to Pedestrian Impact Detection System Disabling and Enabling.
Remove the front fascia. Refer to Front Bumper Fascia Replacement.
Remove the front fascia absorber. Refer to Front Bumper Fascia Energy Absorber Replacement.

Pedestrian Impact Detection Sensor Bolt (Qty: 5)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (27 lb in)

Pedestrian Impact Detection Sensor

Procedure

Disconnect the electrical connector.