Preliminary Procedures

1. Remove the front wheelhouse extension. Refer to Wheelhouse Extension Replacement .
2. Remove the front bumper air deflector. Refer to Front Bumper Fascia Air Deflector Replacement .
3. Disconnect the headlamp washer hose from the fascia.
4. Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement .

1

Front Bumper Fascia Plastic Retainer (Qty: 4)

2

Front Bumper Fascia Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Reach underneath the wheelhouse to access the bolts.

Tighten
2 N·m (18 lb in)

3

Front Bumper Fascia

Procedure

1. Pull forward to remove the front bumper fascia.
2. Disconnect any electrical connectors.
3. Transfer parts as needed.