GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Suzuki
🢒
2009
🢒
XL-7 FWD
🢒
Engine
🢒
Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Ignition Coil Replacement - Bank 2
Removal Procedure
Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s).
Remove the ignition coil bolt(s).
Remove the ignition coil(s).
Installation Procedure
Install the ignition coil(s).
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the ignition coil bolts tightening the bolts to
10 N·m (89 lb in)
.
Connect the engine wiring harness electrical connector(s) (5) to the ignition coil(s).
Install the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.