GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Suzuki
🢒
2009
🢒
XL-7 FWD
🢒
Engine
🢒
Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Throttle Body Assembly Replacement
Removal Procedure
Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
Disconnect the engine wiring harness electrical connector (1) from the throttle actuator control (TAC) module.
Remove the throttle body bolts.
Remove the throttle body and gasket. Discard the gasket.
Installation Procedure
Position a NEW throttle body gasket to the upper intake manifold.
Position the throttle body to the upper intake manifold.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the throttle body bolts and tighten the bolts to
10 N·m (89 lb in)
.
Connect the engine wiring harness electrical connector (1) to the TAC module.
Install the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.