GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Suzuki
🢒
2009
🢒
XL-7 FWD
🢒
Engine
🢒
Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Engine Coolant Temperature Sensor Replacement
Removal Procedure
Partially drain the cooling system. Refer to
Cooling System Draining and Filling
.
Disconnect the engine wiring harness electrical connector (4) from the engine coolant temperature (ECT) sensor.
Remove the ECT sensor.
Installation Procedure
Caution:
Refer to
Component Fastener Tightening Caution
in the Preface section.
Install the ECT sensor and tighten the sensor to
22 N·m (16 lb ft)
.
Connect the engine wiring harness electrical connector (4) to the ECT sensor.
Fill the cooling system. Refer to
Cooling System Draining and Filling
.