GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Suzuki
🢒
2009
🢒
XL-7 FWD
🢒
Engine
🢒
Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Engine Mount Replacement - Right Side
Removal Procedure
Remove the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.
Remove the drive belt. Refer to
Drive Belt Replacement
.
Support the engine. Refer to
Engine Support Fixture
.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove three upper engine mount bracket bolts (1).
Loosen right upper front engine mount bracket bolt (2).
Remove the upper engine mount bracket nuts (1).
Remove the lower bracket bolts (2).
Remove the ABS connector clip from the frame.
Remove the mount (3) and the lower bracket (4) from the vehicle.
Remove the upper bracket bolt (1) from the bracket.
Remove the upper bracket.
Remove the engine mount (3) from the lower bracket (4).
Installation Procedure
Install the engine mount (3) to the lower bracket (4).
Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
Install the ABS connector clip to the bracket.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the lower bracket bolts (2) and tighten to
50 N·m (37 lb ft)
.
Tighten the upper engine mount bracket nuts (1) to
50 N·m (37 lb ft)
.
Install the upper engine mount bracket bolts (1) and tighten to
50 N·m (37 lb ft)
.
Tighten the right upper engine mount bracket bolt (2) to
110 N·m (81 lb ft)
.
Lower the vehicle.
Remove the engine support. Refer to
Engine Support Fixture
.
Install the drive belt. Refer to
Drive Belt Replacement
.
Install the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.