Removal Procedure
- Remove the rear seat assembly. Refer to
Rear Seat Replacement
in
Seats.
- Remove the fastener from the seat belt center
buckle.
- Pull the buckle through the opening gin the seat cushion and remove the
buckle.
Installation Procedure
Important: Apply Permatex® 24200 on all restraint fasteners prior to installation.
- Route the buckle through the openings in the seat cushion.
Notice: Refer to Fastener Notice in the Preface section.
- Install the seat belt buckle with the fastener.
Tighten
Tighten the fasteners to 50 N·m (37 lb ft).
- Install the rear seat assembly. Refer to
Rear Seat Replacement
in
Seats.