GM Service Manual Online
For 1990-2009 cars only

Left Side (Drivers Side) Outside Rearview Mirror Cracking (Replace Outside Rearview Mirror Glass Assembly)

Subject:Left Side (Driver's Side) Outside Rearview Mirror Cracking (Replace Outside Rearview Mirror Glass Assembly)

Models:2003-2004 VUE Vehicles

Attention: Technician


Built Prior to VIN Breakpoints:

Model

VIN Breakpoint

Standard Production VUE

4S840790

(VIN 4S840790 and higher have the re-designed mirror back plate)

Street Expression VUE

4S841950

(VIN 4S841950 and higher have the re-designed mirror back plate)

Condition

The left side (driver's side) outside rearview mirror may crack when adjusting the mirror or closing the door.

Cause

The mirror glass may crack due to ice build up at the bottom of the mirror. The ice build up may cause the mirror back plate to become bonded to the mirror housing. If the mirror back plate is frozen to the mirror housing, adjusting the mirror or closing the door may cause the mirror glass to crack. Vehicles built with the first design back plate have one drain hole at the bottom of the mirror back plate. Vehicles built with the second design back plate have two additional drain holes for a total of three drain holes, which provides improved mirror housing drainage. Only the left side (driver's side) mirror is affected due to "dampener wires" being used to stabilize the mirror. The dampener wires may interfere with water "drainage".

Correction

Replace left side (driver's side) outside rearview mirror glass assembly.

Procedures

Glass Replacement - Removal

Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.

  1. Cover the mirror lens with tape.
  2. Rotate mirror lens to expose outer edge of the mirror lens.

  3. Object Number: 929796  Size: SH
  4. Insert a large flat blade screwdriver (3/8" blade) in to slot between mirror lens and mounting base.
  5. Gently pry out on the mirror lens until the lens snaps off mounting base.
  6. Remove the lens.

Installation

  1. Align new mirror lens with mounting base.

  2. Object Number: 625761  Size: SH
  3. Install the mirror face to the mirror motor by applying pressure to the center of the mirror face with the palm of your hand until the mirror face is fully seated to the mirror motor.
  4. Inspect the mirror for proper operation.

Parts Information

Part Number

Description

22629357

O/S RR View (Refl Glass Only) Mirror-Left Side Only

Claim Information

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for B4156 (Mirror, Left Outside Rearview Mirror - Replace).