Removal Procedure
- Remove the instrument panel retainer. Refer to
Instrument Panel Retainer Replacement
in Instrument Panel, Gages and Console.
- Remove the center air outlet duct push pins from
the cross car beam.
- Remove the center air outlet duct from the cross car beam.
Installation Procedure
- Inspect the seals and replace if damaged using Kent Industries adhesive
backed foam tape P/N 46485 or equivalent.
- Install the center air outlet duct to the cross
car beam.
- Install the center air outlet duct push pins to the cross
car beam.
- Install the instrument panel retainer. Refer to
Instrument Panel Retainer Replacement
in Instrument Panel, Gages and Console.