Removal Procedure
- Drain the cooling system. Refer to
Engine Coolant Check and Replacement
.
- Remove the clamp and hose from the thermostat housing.
- Remove the clamp and hose from the radiator outlet neck.
- Remove the radiator hose from the vehicle.
Installation Procedure
- Install the hose and clamp on the engine outlet. Position the clamp at 1-2 o'clock.
- Install the hose and clamp on the radiator outlet neck. Position the clamp
at 11 o'clock.
- Fill the cooling system and leak test. Refer to
Engine Coolant Check and Replacement
.
- Install and tighten the coolant recovery reservoir cap.