Seat Belt Shoulder Guide Replacement SC1

1. Slide the seat belt webbing through the slit in the seat belt guide.
2. Remove the fasteners and the seat belt shoulder guide.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the seat belt shoulder guide and fasteners.

Tighten
Tighten the seat shoulder belt guide fasteners to 5 N·m (44 lb in).

2. Slide the seat belt webbing through the slit in the seat belt shoulder guide.

Seat Belt Shoulder Guide Replacement SC2

1. Slide the seat belt webbing through the slit in the seat belt guide.



2. Remove the headrest.

2.1.	Raise the headrest assembly to the full-up position.

2.2.	Push the headrest lever towards the rear of vehicle.

2.3.	Pull the headrest out of the seatback.




3. Remove the fasteners from underneath the headrest.
4. Slide the seat belt guide down from underneath the headrest.

1. Install the seat belt guide over the headrest support rods.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the fasteners to attach the seat belt guide to headrest.

Tighten
Tighten the seat shoulder belt guide fasteners to 5 N·m (44 lb in).

3. Install the headrest.

3.1.	Align the headrest support rods with the holes in seatback.

3.2.	Push the headrest lever toward the rear of the vehicle.

3.3.	Push the headrest into the seatback.




4. Slide the seat belt webbing through the slit on the shoulder belt guide.