Service Manual Update for all S Series 2000 Restraint Service Manuals for Inspecting the Steering Column for Accident Damage

The purpose of this bulletin is to update all the 2000 S-Series Restraints Service Manuals at your location. Please obtain all the S-Series Restraints Service Manuals and make the necessary update as indicated below.

On page 59, in step 2 toward the bottom of the page, cross out the word BRACKET and write JACKET and cross out the dimensions 85.50 mm (3.37 in) and change to 120.98 mm (4.76 in).

After this correction has been made, step 2 should read as follows:

2. Check steering column jacket for collapse by measuring between the end of the bearing assembly and the lower edge of the upper jacket. If the dimension is less than 120.98 mm (4.76 in), replace the steering column assembly.