Removal Procedure
- Disable the SIR System.
- Remove console.
- Remove park brake adjuster nut.
- Remove park brake cables from equalizer assembly.
- Pull park brake lever to highest position.
- Lift equalizer cable over park brake indicator switch and swing forward.
Pull cable down and out of park brake lever.
Installation Procedure
- Slide equalizer cable into park brake
lever. Hand start adjuster nut.
- Swing equalizer cable rearward and lift over park brake indicator switch.
- Release and lower park brake lever fully.
- Install both park brake cables into equalizer.
- Adjust park brake.
- Install console.
- Enable the SIR system.