GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 OUTLOOK - AWD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rocker Panel Front Molding Replacement

Rocker Panel Front Molding Replacement Acadia


Object Number: 1862534 Size: MF

Callout

Component Name

Preliminary Procedure

Open both side doors in order to remove the rocker panel front molding assembly.

1

Rocker Panel Finish Panel Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

  1. Remove the rocker panel rear molding assembly.
  2. Remove the 3 front finish panel screws.
  3. Release the 6 lower rocker molding retainers.
  4. Release the 12 upper rocker molding retainers.

Tighten
1.5 N·m (13 lb in)

2

Rocker Panel Rear Molding Retainer (Qty: 18)

3

Rocker Panel Front Molding Assembly

Tip
Replace the retainer clips as needed.

Rocker Panel Front Molding Replacement OUTLOOK


Object Number: 1861564 Size: MF

Callout

Component Name

Preliminary Procedure

Open both side doors in order to remove the rocker panel front molding assembly.

1

Rocker Panel Finish Panel Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

  1. Remove the rocker panel rear molding assembly.
  2. Remove the 3 front finish panel screws.
  3. Release the 7 lower rocker molding retainers.
  4. Release the 12 upper retainers.

Tighten
1.5 N·m (13 lb in)

2

Rocker Panel Rear Molding Assembly

Tighten
1.5 N·m (13 lb in)

3

Rocker Panel Front Molding Assembly

Tip
Replace the retainer clips as needed.