GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 L300/LW300 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 891578 Size: SH
  2. Remove the rear stabilizer bar to support assembly clamp bolts.
  3. Remove the stabilizer bar clamps from the stabilizer bar.
  4. Remove the insulators from the stabilizer bar.

Installation Procedure

    Object Number: 891578 Size: SH
  1. Install the insulators to the stabilizer bar.
  2. Install the stabilizer bar clamps to the stabilizer bar.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer bar clamp to support assembly bolts.

    4. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  4. Lower the vehicle.