GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 L300/LW300 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Engine Mount Replacement

Removal Procedure

    Object Number: 895973 Size: SH
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls 3.0L (L81).

    2. Object Number: 893254 Size: SH
  2. Support the engine.

    3. Object Number: 891691 Size: SH
  3. Remove the engine mount to bracket bolts.

    4. Object Number: 891719 Size: SH
  4. Remove the engine mount to body bolts.
  5. Remove the engine mount from the vehicle.

    6. Object Number: 892942 Size: SH
  6. Remove the bolt the retains the mount to the engine mount body bracket.

    7. Important: Retain the isolation pad for assembly.

  7. Remove the mount from the mount bracket and isolation pad.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 892942 Size: SH

    Important: The isolation must be attached to the engine mount. Replace the isolation pad if necessary.

  1. Assemble the engine mount , engine mount bracket and isolation pad.

    2. Tighten
    Tighten the engine mount to bracket bolt to 90 N·m (66 lb ft).


    Object Number: 891719 Size: SH
  2. Install the engine mount to the vehicle. Hand tighten the bolts at this time.

    3. Object Number: 891691 Size: SH
  3. Install the engine mount to engine bracket bolts.

    4. Tighten

        • Tighten the engine mount to bracket bolts to 55 N·m (41 lb ft).
        • Tighten the engine mount to vehicle bolts to 55 N·m (41 lb ft).

    Object Number: 893254 Size: SH
  4. Remove the engine support.

    5. Object Number: 895973 Size: SH
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls 3.0L (L81).