GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 953210  Size: SH
  1. Remove the mirror trim cover by pulling out at the top.

  2. Object Number: 459511  Size: SH
  3. Remove the foam insulator.

  4. Object Number: 894266  Size: SH
  5. Disconnect the electrical connector from the mirror.
  6. Remove the nut covers and the nuts from the mirror.
  7. Remove the mirror from the door.

Installation Procedure


    Object Number: 894266  Size: SH
  1. Position the mirror to the door.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the outside rearview mirror nuts and covers.
  4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  5. Connect the electrical connector to the mirror.
  6. Inspect the operation of the mirror.

  7. Object Number: 459511  Size: SH
  8. Install the foam insulator.

  9. Object Number: 953210  Size: SH
  10. Install the mirror trim cover by placing the lower portion of the cover behind the trim panel and push in on the top fastener.