GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 L300/LW300 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pressure Pipe/Hose Replacement

Power Steering Pressure Pipe/Hose Replacement L61

Removal Procedure
  1. Remove the power steering reservoir cap.

    2. Object Number: 891755 Size: SH
  2. Disconnect power steering pressure hose at the power steering gear.

    3. Object Number: 891794 Size: SH
  3. Disconnect the power steering pressure hose from the power steering pump.
  4. Separate the power return hose from the pressure hose.
  5. Remove the power steering hose assembly from the vehicle. Note the routing for installation.

Installation Procedure

    Object Number: 891794 Size: SH
  1. Route the hoses to the vehicle as noted during removal.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Connect the power steering pressure hose to the steering gear.

    3. Tighten
    Tighten the power steering hose fitting to 27 N·m (20 lb ft).

  3. Connect the power steering pressure hose to the power steering pump.

    4. Tighten
    Tighten the power steering hose fitting to 27 N·m (20 lb ft).

  4. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .