GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 L300/LW300 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Clutch Actuator Cylinder Replacement

Removal Procedure

    Object Number: 895540 Size: SH
  1. Remove the transaxle. Refer Transmission Replacement .
  2. Remove the hydraulic line from the slave cylinder.
  3. Remove the hydraulic line from the slave cylinder.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 895540 Size: SH
  1. Install the slave cylinder. Use LOCTITE 592® P/N 21485278 thread sealant on the screws.

    2. Tighten
    Tighten the slave cylinder fasteners to 10 N·m (89 lb in).

  2. Connect the hydraulic line to the slave cylinder.
  3. Bleed the slave cylinder. Refer to Clutch Slave Cylinder Bleeding.
  4. Install the transaxle. Refer to Transmission Replacement .