GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 L300/LW300 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Transmission Control Lever Boot Replacement

Removal Procedure

    Object Number: 893838 Size: SH
  1. Pull the control assembly boot down to disengage the boot from the knob.

    2. Object Number: 893839 Size: SH
  2. Using a screwdriver, remove the control lever knob retainer. Remove the control lever knob.

    3. Object Number: 893907 Size: SH
  3. Pull up on the control boot until the indicator bezel disengages from the console.
  4. Disconnect the indicator bezel electrical connector. Remove the bezel and boot.

    5. Object Number: 893886 Size: SH
  5. Disengage the control boot from the indicator bezel from the underside of the bezel. Remove the boot.

Installation Procedure

    Object Number: 893886 Size: SH
  1. Install the control boot into the indicator bezel.

    2. Object Number: 893907 Size: SH
  2. Install the bezel and boot over the shift lever and connect the indicator bezel electrical connector. Snap the bezel into the console opening.

    3. Object Number: 893839 Size: SH
  3. Install the control lever knob and the knob retainer.

    4. Object Number: 893840 Size: SH
  4. Install the control assembly boot onto the knob so the O-ring in the top of the boot is seated in the groove on the bottom of the knob.