Test Description
The numbers below refer to the step numbers on the diagnostic table:
-
Suspension components that are not operating properly may cause a disturbance to the vehicle during application of the brake system.
-
Antilock brake system operation could produce feedback through the brake pedal during application of the brake system.
Step | Action | Yes | No |
|---|---|---|---|
1 | Were you sent here from the Hydraulic Brake Symptom table? | Go to Step 2 | |
Inspect the suspension system for proper operation. Refer to Diagnostic Starting Point - Suspension General Diagnosis in Suspension General Diagnosis. Did you find and correct a condition? | Go to Step 7 | Go to Step 3 | |
Inspect the antilock brake system, if equipped, for proper operation. Refer to Diagnostic Starting Point - Antilock Brake System in Antilock Brake System. Did you find and correct a condition? | Go to Step 7 | Go to Step 4 | |
4 | Inspect the disc brake system for proper operation. Refer to Disc Brake System Diagnosis . Did you find and correct a condition? | Go to Step 7 | Go to Step 5 |
5 | Inspect the drum brake system, if equipped, for proper operation. Refer to Drum Brake System Diagnosis . Did you find and correct a condition? | Go to Step 7 | Go to Step 6 |
6 | Inspect the hydraulic brake system for proper operation. Refer to Hydraulic Brake System Diagnosis . Did you find and correct a condition? | Go to Step 7 | |
7 | Road test the vehicle in order to confirm proper operation. Refer to Brake System Vehicle Road Test . Is the condition still present? | Go to Step 2 | System OK |
