Removal Procedure
- Remove the HVAC Module. Refer to
Heater and Air Conditioning Control Replacement
procedure in HVAC.
- Remove the inner dash panel insulator fasteners
Important: Cutting the old dash panel insulator, at the top of the pass-through opening
on driver's side will allow the dash panel to be removed without having to disconnect
the wiring harnesses.
- Remove the inner dash panel insulator.
Installation Procedure
- Cut the new dash panel insulator.
- Install the dash panel insulator into the vehicle. Make sure to route
the wiring harnesses through opening on driver's side of dash panel insulator.
- Apply weatherstrip adhesive to the backside of the dash panel insulator
on both sides of the area where the cut was made.
- Install the dash panel insulator fasteners.
- Install the HVAC module. Refer to
Heater and Air Conditioning Control Replacement
procedure
in HVAC.