The throttle position (TP) sensor is mounted on the throttle body assembly. The sensor is comprised of two potentiometers with common supply and ground circuits, and independent signal circuits. As the throttle opens, the signal wire on sensor 1 reads a higher voltage, and the voltage on signal wire for sensor 2 decreases. The ECM sets this DTC when the signal being received is higher than expected.

This DTC will set when:

P0223 is a (type A) DTC.

To locate an intermittent problem use scan tool to monitor TP sensor 2 voltage with engine running.

Wiggling wires while monitoring TP sensor 2 voltage may locate area where short to voltage or open may exist.