GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 ION 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Replacement - Center Rear

Removal Procedure

    Object Number: 876579 Size: SH
  1. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Remove the retractor bolt from the rear center seat belt.
  3. Remove the seat belt retractor from the rear shelf.

Installation Procedure

    Object Number: 876579 Size: SH
  1. Install the seat belt retractor to the rear shelf.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt to the seat belt retractor.

    3. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).

  3. Install the rear window panel trim. Refer to Rear Window Shelf Trim Panel Replacement .
  4. Inspect the rear seat retractor belt for proper operation.