GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 ION 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Height Adjuster Replacement - Front

Removal Procedure

    Object Number: 876422 Size: SH
  1. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement .
  2. Remove the height adjuster bolts.
  3. Remove the height adjuster from the vehicle.

Installation Procedure

    Object Number: 876422 Size: SH
  1. Install the height adjuster to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the height adjuster bolts to the front seat belt.

    3. Tighten
    Tighten the bolts to 45 N·m (33 lb ft).

  3. Install the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement .