- Adjust the deck lid cross-car by loosening the hinge to rear window lower panel nuts. Position the deck lid as needed.
- Adjust the front of the deck lid fore and aft, and up and down, by loosening the deck lid to hinge arm bolts. Position as needed.
- Adjust the rear of the deck lid by adjusting the lock striker up and down.
- Install the rear compartment lid hinge to rear window lower panel nuts.
- Install the rear compartment deck lid to hinge arm bolts.
- Tighten the latch striker bolts when the adjustments are complete.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the nuts to 10 N·m (89 lb in).
Tighten
Tighten the nuts to 10 N·m (89 lb in).
Tighten
Tighten the bolts to 10 N·m (89 lb in).
