Removal Procedure
- Remove the outer door panel. Refer to
Rear Side Door Outer Panel Replacement.
- Remove the sound insulator. Apply only enough pressure to release the insulator from the door panel.
Installation Procedure
Important: Ensure that the attaching point are clean and dry. Replace any insulator that was damaged during removal.
- Using the locating holes, carefully align the sound insulator to the door panel.
Important: If the adhesive on the insulator does not stick, use 3M® Silver Duct Tape P/N 06975 or equivalent to adhere the insulator to the door panel.
- Install the outer door panel. Refer to
Rear Side Door Outer Panel Replacement.