GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the hood.
  2. Remove the right front fender liner. Refer to Front Fender Liner Replacement.

  3. Object Number: 815217  Size: SH
  4. Disconnect the washer hose from the washer pump.
  5. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.

  6. Object Number: 815215  Size: SH
  7. Disconnect the washer hose from the air inlet grille panel.
  8. Pull the washer hose pump end out alongside the right front inner fender and into the engine compartment.
  9. Remove the washer hose from the vehicle.

Installation Procedure


    Object Number: 815215  Size: SH
  1. Position the washer hose to the vehicle.
  2. Route the washer hose pump end down alongside the right front inner fender and into the right front inner fender area.
  3. Connect the washer hose to the attachments at the air inlet grille panel.

  4. Object Number: 815217  Size: SH
  5. Lower the vehicle.
  6. Connect the washer hose to the washer pump.
  7. Install the right front fender liner. Refer to Front Fender Liner Replacement.
  8. Close the hood.