Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn ON the ignition, with the engine OFF.
2. Place the hazard switch to the OFF position.

Are the hazard lamps OFF?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Repair a short to ground in the turn/hazard request circuit. Refer to Circuit Testing and Wiring Repairs .

Did you complete the repair?

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2