GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 ION 🢒 Body Systems 🢒 Lighting 🢒 Rear License Plate Lamp Replacement

Removal Procedure

    Object Number: 741329 Size: SH
  1. Remove the screws from the license lamp.
  2. Remove the license lamp from the rear compartment lid applique.
  3. Remove the bulb/socket from the license lamp by rotating the socket counterclockwise.

    4. Object Number: 741330 Size: SH
  4. Remove the license lamp bulb from the socket, if required.

Installation Procedure

    Object Number: 741330 Size: SH
  1. Install the license lamp bulb to the socket, if required.

    2. Object Number: 741329 Size: SH
  2. Install the license lamp socket to the license lamp by rotating the socket clockwise.
  3. Install the license lamp to the rear compartment lid applique.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the license lamp screws to the license lamp.

    5. Tighten
    Tighten the license lamp screw to 2 N·m (18 lb in).